HYDRO BAN

Hydro Ban is a liquid applied, thin waterproofing anti-fracture membrane that combines optimum performance and unmatched productivity.

Show More

Features & Benefits

  • Allow for flood testing in 2 hours at 70°F (21°C) or higher¥
  • Does not require the use of fabric.*
  • Bonds directly to metal, PVC and ABS plumbing fixtures only
  • Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
  • Changes in color from a light sage to an olive green when cured
  • Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
  • “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
  • Exceeds ANSI A118.10 and A118.12
  • IAPMO approved
  • Rapid drying for a faster time to tile
  • Lighter color for ease of inspection
  • Safe—no solvents and non-flammable
  • Install tile, brick and stone directly onto membrane

* For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions

¥ Refer to cautions section for more information on curing

Product Information

Hydro Ban is a liquid applied, thin waterproofing anti-fracture membrane that combines optimum performance and unmatched productivity. Hydro Ban is rapid drying allowing for a faster time to tile and flood testing, as well as faster flood testing in cold temperatures and over mortar beds. Hydro Ban does not require the use of fabric in the field, coves or corners and bonds directly to metal and plastic plumbing fixtures. Save yourself time and money, and complete your installations faster with greater ease.

Product Data Sheets

Safety Data Sheets

How to Use